5 | Operation
User Reference Guide
26
FTXP20~35M5V1B9
Daikin room air conditioners
4D520466-7C – 2020.03
5.9.1 To start/stop OFF timer operation
1 Press to start.
Result: is displayed on the LCD and the timer lamp lights up.
INFORMATION
Each time is pressed, the time setting advances by 1 hour. The timer can be set
between 1 to 9 hours.
2 Press to stop.
Result: disappears from the LCD and the timer lamp goes off.
Use this feature if the unit is operating and you want to stop operation after a
certain time.
3 Press .
Result: is displayed on the LCD and the timer lamp lights up.
4 Press again if you want to change the time setting.
INFORMATION
Each time is pressed, the time setting advances by 1 hour. The timer can be
set between 1 to 12 hours.
Example: If is set when the unit is operating, operation will stop after
5hours.
5 To cancel the setting, press .
Result: and the time setting disappear from the LCD and the timer lamp goes
off.
INFORMATION
Night set mode
When the OFF timer is set, the air conditioner automatically adjusts the temperature
setting (0.5°C up in cooling, 2.0°C down in heating) to prevent excessive cooling/
heating and ensure a comfortable sleeping temperature.
INFORMATION
When you set the ON/OFF timer, the time setting is stored in the memory. The
memory will be reset when the user interface batteries are replaced.
Use of night set mode in combination with OFF timer
The air conditioner automatically adjusts the temperature setting (0.5°C up in
cooling, 2.0°C down in heating) to prevent excessive cooling/heating and ensure a
comfortable sleeping temperature.
5.9.2 To start/stop ON timer operation
1 Press to start.
Result: is displayed on the LCD and the timer lamp lights up.