10 ■English
OPERATION
AUTO · DRY · COOL · HEAT · FAN Operation
The air conditioner operates with the operation mode of your
choice.
From the next time on, the air conditioner will operate with the
same operation mode.
■
To start operation
1. Press “MODE selector button” and select a
operation mode.
• Each pressing of the button advances the mode setting in
sequence.
:AUTO
:DRY
:COOL
:HEAT
:FAN
2. Press “ON/OFF button” .
• The OPERATION lamp lights up.
■
To stop operation
3. Press “ON/OFF button” again.
• Then OPERATION lamp goes off.
■
To change the temperature setting
4. Press “TEMPERATURE adjustment button”.
DRY or FAN mode AUTO or COOL or HEAT mode
The temperature setting is not variable.
Press “ ” to raise the temperature and press “ ” to
lower the temperature.
Set to the temperature you like.
F
TEMP
ON/OFF
POWERFUL
HOME LEAVE
MODE
FAN
SWING
QUIET
SENSOR
2, 3
1
4
5
ON
TIMER
ON
CANCEL
OFF
F
ON
OFF
+
.
01_EN_3P141693-1K.fm Page 10 Tuesday, September 19, 2006 3:46 PM
To Next Page
Loading...
