SiENBE12-713 Instruction
System Configuration 119
"
Remote control
1. Signal transmitter:
• It sends signals to the indoor unit.
2. Display:
• It displays the current settings.
(In this illustration, each section is shown
with all its displays ON for the purpose of
explanation)
3. SENSOR button:
INTELLIGENT EYE operation
4. POWERFUL button:
POWERFUL operation
5. TEMPERATURE adjustment buttons:
• It changes the temperature setting.
6. ON/OFF button:
• Press this button once to start operation.
Press once again to stop it.
7. MODE selector button:
• It selects the operation mode.
(AUTO/DRY/COOL/HEAT/FAN)
8. SILENT button:
OUTDOOR UNIT SILENT
operation
9. FAN setting button:
• It selects the air flow rate setting.
10. SWING button
• Flap (Horizontal blade)
11. SWING button
• Louver (Vertical blades)
12. COMFORT AIRFLOW mode button
13. ON TIMER button
14. OFF TIMER button
15. TIMER Setting button:
• It cancels the time setting.
16. TIMER CANCEL button:
• It cancels the timer setting.
17. CLOCK button
QUIET
B
To Next Page
Loading...
