SiENBE12-713 Instruction
System Configuration 135
Adjusting the air flow direction
FTK(X)S 50/60/71 F
You can adjust the air flow direction to increase your comfort.
"
To adjust the horizontal blades (flaps)
1. Press “SWING button ”.
• “ ”The display on the LCD and the flaps
will begin to swing.
2. When the flaps have reached the desired
position, press “SWING button ”
once more.
• The flaps will stop moving.
• “ ”disappears from the LCD.
"
To adjust the vertical blades (louvers)
3. Press “SWING button ”.
• “ ” is displayed on the LCD.
4. When the louvers have reached the desired
position,
press the “SWING button ” once more.
• The louvers will stop moving.
• “ ” disappears from the LCD.
TIMER
ON
CANCEL
OFF
1, 2
3, 4
To Next Page
Loading...
