Daikin FTXS35K2V1B - Pcbs

PCBs Si041259EA
8 Removal Procedure
6. PCBs
Warning

Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Step
Procedure Points
1. Remove the signal
receiver PCB.
[S46]: display PCB
1
Disconnect the
connector [S46].
2
Unfasten the 2 hooks
and remove the signal
receiver unit.
3
Unfasten the 3 hooks
and remove the signal
receiver PCB.
[S48]: control PCB
4
Disconnect the
connector [S48].
(R19038)
[S46]
(R19152)
Signal receiver unit
Hook
Hook
(
R19039
)
[S48]
Si
g
nal receiver PCB
Hook