Daikin FTXS35K2V1B - Horizontal Blades

Si041259EA Horizontal Blades
Removal Procedure 5
4. Horizontal Blades
Warning

Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Step
Procedure Points
1
Open the horizontal
blade.

The center shaft can be
released easily by bending
the blade.
2
Unfasten the center
shaft while bending the
horizontal blade (large)
slightly.
3
Unfasten the left shaft.
4
Unfasten the right shaft
and remove the
horizontal blade (large).

Installation procedure
1. Since the key pattern hook is
provided, rotate the blade
and fit it to the right shaft
first.
2. Fit the blade to the center
and left shafts.

When reassembling, mount
the large horizontal blade to
the upper position and the
small horizontal blade to the
lower position.
Do not put them in the wrong
place.
5
Remove the horizontal
blade (small) in the
same way.
(R19028)
Horizontal blade (large)
(R19029)
(R19030)
(R19031)