Daikin FTXS50K2V1B - Operating Your Air Conditioner; Starting and Stopping Operation; Understanding Operation Modes

PCBs Si041259EA
10 Removal Procedure
4. Remove the control PCB. 1: black (front)
1
Disconnect all the
terminals from the
terminal board.
2: white (front)
3: red (front)
: green (front)
green/yellow (back)
2
Unfasten the 2 lower
hooks of the control
PCB.
3
Lift up the bottom of the
control PCB and pull it
out.

The control PCB is also fixed
by 2 upper hooks. When
reassembling, be sure to fit
all the 4 hooks.
Step
Procedure Points
(R19044)
Terminal board
(R19171)
Hook
Control PCB
(R8098)