EasyManua.ls Logo

Daikin FTXS50KVM - User Manual

Daikin FTXS50KVM
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
REMOVAL
PROCEDURE
SERVICE MANUAL
Indoor Unit
Inverter / Non-Inverter
Wall Mounted Type
5.0/6.0/7.1 kW Class
15000/18000/24000 Btu/h Class
Si041142
Question and Answer IconNeed help?

Do you have a question about the Daikin FTXS50KVM and is the answer not in the manual?

Daikin FTXS50KVM Specifications

General IconGeneral
BrandDaikin
ModelFTXS50KVM
CategoryAir Conditioner
LanguageEnglish

Summary

Removal of Air Filters and Front Panel

Appearance Features and Safety Warnings

Details unit appearance features and important high voltage safety warnings before disassembly.

Remove Air Filters

Step-by-step guide on how to properly remove the standard air filters from the unit.

Remove Titanium Apatite Filters

Instructions for removing the specific Titanium apatite photocatalytic air-purifying filters.

Remove Front Panel

Procedure for safely detaching and removing the main front panel of the indoor unit.

Removal of Front Grille

Remove Service Cover

Steps to remove the service cover, including unscrewing and detaching it.

Remove Front Grille

Detailed procedure for unfastening hooks and removing the front grille.

Removal of Horizontal and Vertical Blades

Remove Horizontal Blades

Step-by-step instructions on how to detach the horizontal air direction blades.

Remove Vertical Blades

Procedure for safely releasing and removing the vertical air direction blades.

Removal of Electrical Box, PCBs, and Motors

Remove Electrical Box

Comprehensive guide for safely removing the main electrical box and its internal components.

Remove PCBs

Instructions for carefully removing the Printed Circuit Boards (PCBs) from the unit.

Remove Swing Motors

Procedure for detaching both horizontal and vertical swing motors.

Removal of Indoor Heat Exchanger

Disconnect Refrigerant Piping

Steps for safely disconnecting the gas and liquid refrigerant piping.

Remove Indoor Unit from Installation Plate

Instructions on how to detach the main indoor unit from its mounting plate.

Remove Indoor Heat Exchanger

Detailed procedure for unfastening hooks and removing the indoor heat exchanger.

Removal of Fan Motor and Rotor

Remove Side Plates

Instructions for removing both the right and left side plates for access.

Remove Fan Motor and Rotor Assembly

Procedure for initially detaching the fan motor and rotor assembly.

Remove Fan Motor, Rotor, and Bearing

Steps for the final removal of the fan motor, rotor, and bearing components.

Related product manuals