Daikin FTXS50K2V1B - Controlling Airflow Direction; Auto Swing and 3 D Airflow; Manual Flap and Louver Adjustment

Swing Motors Si041259EA
12 Removal Procedure
4
Disconnect the
connector (green) from
the swing motor.
5
Remove the 2 screws
and remove the swing
motor for horizontal
blade (large).
6
Disconnect the
connector (red) from
the swing motor.

When reassembling, mount
the swing motor for
horizontal blade (large) first.
(connector: red)
Next, mount the swing motor
for horizontal blade (small).
(connector: green)
7
Release the swing
motor harness from the
hook of the cover link
(1).
Step
Procedure Points
(R19048)
(R19049)
Swing motor
for horizontal
blade (large)
(R19050)
(R19051)
Cover link (1)
Hook