What to do if Daikin FTXS71BVMA operation stops suddenly and the OPERATION lamp is on?
If your Daikin Air Conditioner stops suddenly due to a large voltage fluctuation, it's a system protection feature. The unit will automatically resume operation in about 3 minutes.
Why is my Daikin Air Conditioner outdoor unit leaking water?
In HEAT mode, frost on the outdoor unit melts into water or steam when the Daikin air conditioner is in defrost operation. In COOL or DRY mode, moisture in the air condenses into water on the cool surface of outdoor unit piping and drips.
Why my Daikin Air conditioning operation does not start soon?
You should wait for about 3 minutes.
What to do if water leaks from the indoor unit of Daikin Air conditioning?
If water leaks from the indoor unit, turn the breaker OFF and call the service shop.
What to do if Daikin Air conditioning operation stops suddenly and the OPERATION lamp flashes?
If the Daikin air conditioning stops suddenly and the OPERATION lamp flashes, clean the air filters or remove any obstacles. Then, turn the breaker OFF, turn it ON again, and try operating the air conditioner with the remote controller.
General| Cooling Capacity | 7.1 kW |
|---|---|
| Heating Capacity | 8.0 kW |
| Energy Efficiency Rating (Cooling) | A++ |
| Energy Efficiency Rating (Heating) | A+ |
| Weight (Indoor Unit) | 12 kg |
| Weight (Outdoor Unit) | 45 kg |
| Power Supply | 220-240V, 50Hz |
| Type | Split System |
| Refrigerant | R32 |
Critical safety warnings and precautions for unit operation.
Guidelines for proper installation location, electrical work, and relocation.
Identification of indoor unit parts and control panel.
Identification of outdoor unit components.
Explanation of the remote controller's buttons and capabilities.
Instructions for setting up the remote controller, including battery installation.
Steps to set the clock and turn on the main power breaker.
How to select AUTO, DRY, COOL, HEAT, and FAN modes.
How to adjust the air flow rate setting.
Adjusting horizontal flap and vertical louvers for airflow direction.
Using POWERFUL and Outdoor Unit SILENT modes.
Using HOME LEAVE and INTELLIGENT EYE for personalized and energy-saving operation.
Instructions for setting ON and OFF timers for automated control.
Guidelines for cleaning the unit and its components.
How to clean and replace air filters.
Checks to perform before long idle periods and general checks.
Steps to check for common operational problems.
Symptoms requiring immediate service shop attention.
To Next Page
