What to do if Daikin FTXS90FVMA Air Conditioner does not operate and OPERATION lamp is off?
If your Daikin Air Conditioner isn't working and the OPERATION lamp is off, check a few things: first, see if a breaker has tripped or a fuse has blown. Next, verify whether there's a power failure in your area. Also, make sure that batteries are correctly installed in the remote controller, and confirm that the timer setting is accurate.
What to do if Daikin FTXS90FVMA operation stops suddenly and OPERATION lamp flashes?
If your Daikin Air Conditioner stops suddenly and the OPERATION lamp is flashing, check if the air filters are clean and whether anything is blocking the air inlet or outlet of the indoor and outdoor units. Clean the air filters or remove any obstacles, then turn the breaker OFF. Also, ensure that the operation modes are the same for all indoor units connected to the outdoor units in the multi system.
Why Daikin FTXS90FVMA Air Conditioner operation does not start soon?
If your Daikin Air Conditioner doesn't start immediately, please wait for about 3 minutes.
General| Cooling Capacity | 9.0 kW |
|---|---|
| Heating Capacity | 10.0 kW |
| Energy Efficiency Ratio (EER) | 3.21 |
| Type | Split System |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R32 |
To Next Page
