13
POWERFUL Operation
POWERFUL operation quickly maximizes the cooling
(heating) effect. You can get the maximum capacity.
■ To start POWERFUL
operation
1. Press “POWERFUL button”.
•
POWERFUL operation ends in 20 minutes.
Then the system automatically operates
again with the settings which were used
before POWERFUL operation.
• When using POWERFUL operation,
there are some functions which are not
available.
• “ ” is displayed on the LCD.
■ To cancel POWERFUL
operation
2. Press “POWERFUL button”
again.
•
“ ” disappears from the LCD.
NOTE
■
■■
■
Notes on POWERFUL operation
•
POWERFUL operation is not available in modes other than cooling or heating.
•
In COOL and HEAT mode
To maximize the cooling (heating) effect, the air flow rate be fixed to the maximum setting.
The temperature and air flow settings are not variable.
1, 2
01_EN_3P147100-4H.fm Page 13 Thursday, October 27, 2005 10:12 AM
To Next Page
Loading...
Need help?
General
