Why doesn't hot air flow out soon after starting HEAT operation on my Daikin FVXS60LVMA Air Conditioner?
The system is designed to start discharging air only after it has reached a certain temperature.
Why did my Daikin Air Conditioner stop suddenly with the OPERATION lamp on?
For system protection, the air conditioner may stop operating due to a sudden large voltage fluctuation. It will automatically resume operation in about 3 minutes.
What to do if an abnormal functioning happens during operation of Daikin FVXS60LVMA?
The air conditioner may malfunction due to lightning or radio waves. Turn the breaker off, then turn it back on, and try operating the air conditioner with the remote controller.
What to do if my Daikin Air Conditioner is not operating?
If the Daikin Air Conditioner does not operate, check the breaker and the fuse to ensure there isn’t a power failure.
How to fix Daikin Air Conditioner ON/OFF TIMER if it does not operate according to the settings?
If the ON/OFF TIMER on your Daikin Air Conditioner isn't working as set, try changing or disabling the settings in the WEEKLY TIMER.
What to do if my Daikin FVXS60LVMA Air Conditioner operation stops suddenly and the OPERATION lamp flashes?
If your Daikin Air Conditioner stops suddenly and the OPERATION lamp is flashing, try the following steps: 1. Clean the air filter. 2. Turn the breaker off, remove any obstacles, and turn it back on. 3. If the lamp continues to flash, you should contact the service shop where you purchased the air conditioner. 4. Ensure all indoor units are set to the same operation mode. If in AUTO mode, temporarily set all indoor units to COOL or HEAT.
Why does the Daikin Air Conditioner HEAT operation stop suddenly and a flowing sound is heard?
The Daikin Air Conditioner system is taking away the frost on the outdoor unit. Wait for about 4 to 12 minutes.
Why hot air does not flow out soon after the start of HEAT operation in Daikin FVXS60LVMA?
The Daikin Air Conditioner system is designed to start discharging air only after it has reached a certain temperature.
Why Daikin Air Conditioner operation does not start soon?
The Daikin Air Conditioner operation may not start immediately for a few reasons: * If the ON/OFF button was just pressed, wait about 3 minutes. * If the mode was reselected, allow some time to pass. * If the air conditioner is warming up, wait 1 to 4 minutes.
How to fix Daikin FVXS60LVMA ON/OFF TIMER that does not operate according to the settings?
If the Daikin Air Conditioner ON/OFF TIMER does not operate according to the settings, check if the ON/OFF TIMER and the WEEKLY TIMER are set to the same time. Change or disable the settings in the WEEKLY TIMER.
General| Type | Floor Standing |
|---|---|
| Cooling Capacity | 6.0 kW |
| Heating Capacity | 7.0 kW |
| Energy Efficiency Ratio (EER) | 3.21 |
| Refrigerant | R32 |
| Noise Level (Outdoor Unit) | 48 dB(A) |
| Power Supply | 220-240 V, 50 Hz |
| Indoor Noise Level | 30 dB(A) |
Critical safety instructions to prevent severe injury or death from improper operation.
Instructions to prevent property damage or minor injury due to incorrect use.
Safe operation, electrical safety, handling refrigerants, and environmental considerations.
Guidelines for proper and safe installation locations, considering environment and neighbors.
Details of indoor unit components, including filters, louvers, and control panel.
Identification of outdoor unit components like air inlet, outlet, and terminals.
Overview of the remote control buttons, display, and signal transmitter.
Instructions for installing batteries and operating the remote controller.
Procedure for setting the unit's clock, essential for timer functions.
How to start, stop, and change basic modes like AUTO, COOL, HEAT, DRY, FAN.
Steps to change the fan speed setting for different modes.
Adjusting the horizontal flap and vertical louvers for optimal airflow.
Choosing specific blowing patterns using the air outlet selection switch.
Maximizing cooling or heating effect for rapid temperature adjustment.
Reducing the noise level of the outdoor unit for quiet operation.
Limiting maximum power consumption for energy efficiency.
Scheduling automatic unit turn-off and turn-on times.
Programming daily and weekly operational schedules for personalized comfort.
Efficiently copying timer settings from one day to another.
Confirming, deactivating, and deleting programmed timer reservations.
Managing operation modes and priority settings in a multi-indoor unit system.
How the QUIET mode functions and interacts in a multi-system setup.
Forcing all connected indoor units to operate in a single mode (COOL or HEAT).
Steps for cleaning the indoor unit and remote controller.
Instructions for cleaning or replacing air filters and photocatalytic filters.
Effects of dirty filters and essential system checks before long idle periods.
Explanations for normal operational sounds and behaviors that are not faults.
Performing basic checks and diagnosing faults using error codes.
Critical issues requiring immediate attention and when to call a service shop.
Interpreting error codes displayed on the remote controller for troubleshooting.
To Next Page