SiBE611027_A Operation Manual
Operation Manual 28
2.6 OFF TIMER Operation
16
OFF TIMER Operation
To use OFF TIMER operation
1. Press .
3. Press again.
• The TIMER lamp lights up.
To cancel OFF TIMER operation
4. Press .
NOTE
Timer functions are useful for automatically switching the unit on
or off at night or in the morning. You can also use OFF TIMER and
ON TIMER in combination.
• Check that the clock is correct.
If not, set the clock to the present time.
2. Press until the time setting
reaches the point you like.
• Each pressing of either button increases or decreases
the time setting by 10 minutes. Holding down either
button changes the setting rapidly.
• “ ” and setting time disappear from the LCD.
• “ ” and day of the week are displayed on the LCD.
• The TIMER lamp goes off.
Notes on TIMER operation
• When TIMER is set, the present time is not displayed.
• Once you set ON/OFF TIMER, the time setting is kept in the memory. The memory is
canceled when remote controller batteries are replaced.
• When operating the unit via the ON/OFF TIMER, the actual length of operation may vary
from the time entered by the user. (Maximum approx. 10 minutes)
• “ ” and setting time are displayed on the LCD.
• “ ” is displayed on the LCD.
• “ ” blinks.
To Next Page
Loading...
