Daikin LX10F11B - Page 107

4-15
4.8.2 Replacing the evaporator fan motor
（1）Removing
a）Remove access panel.
b）Loosen 4 pcs bolts (M8) from fan blade fixing metal.
c） Disconnect power supply connector on
fan motor.
d）Pull the fan assembly straight out.
e） Remove fan diffuser and replace fan motor.
(The screw of fan fixing nut (M14) is reverse direction.)
（2）Installation
f） Re-stall fan in a reverse way of removing.
(Securely connect the power supply connector for the fan motor.
Tighter Looser
Loosen the four M8 bolts.
0401-26LX10F11BEn.indd4-150401-26LX10F11BEn.indd4-15 2014/11/1916:42:202014/11/1916:42:20
https://daikin-p.ru