Why the heating operation stops suddenly and a flowing sound is heard in Daikin B-Series Inverter?
- JJulie HuberSep 9, 2025
If the heating operation stops suddenly and you hear a flowing sound, you should wait for about 4 to 12 minutes.
Why the heating operation stops suddenly and a flowing sound is heard in Daikin B-Series Inverter?
If the heating operation stops suddenly and you hear a flowing sound, you should wait for about 4 to 12 minutes.
What to do if water leaks from the indoor unit of my Daikin Air Conditioner?
If water is leaking from the indoor unit of your Daikin Air Conditioner, turn the breaker OFF and call the service shop.
What to do if my Daikin Inverter stops suddenly and the OPERATION lamp blinks?
If your Daikin Inverter stops suddenly and the OPERATION lamp is blinking, you should clean the air filters and remove any obstacles. Then, turn the breaker OFF, and then turn it ON again. Try operating the air conditioner with the remote controller.
Why hot air does not flow out soon after the start of heating operation of Daikin Inverter?
If hot air does not flow out soon after starting the heating operation, you should wait for 1 to 4 minutes.
What to do if my Daikin Air Conditioner does not operate (OPERATION lamp is off)?
If your Daikin Air Conditioner isn't turning on and the OPERATION lamp is off, check the following: ensure that the breaker hasn't tripped or a fuse hasn't blown. Verify there isn't a power failure, that the batteries are correctly installed in the remote controller, and that the timer setting is correct.
What to do if my Daikin Air Conditioner operation stops suddenly (OPERATION lamp is on)?
If your Daikin Air Conditioner stops suddenly and the OPERATION lamp is on, it might be due to a system protection triggered by a large voltage fluctuation. The unit should automatically resume operation in about 3 minutes.
What to do if my Daikin Air Conditioner switch or a button often fails to work properly?
If a switch or button on your Daikin Air Conditioner often fails to work properly, turn the breaker OFF and call the service shop.
What to do if my Daikin Air Conditioner has an abnormal functioning during operation?
If your Daikin Air Conditioner is malfunctioning during operation, it could be due to lightning or radio waves interfering with its operation. Try turning the breaker OFF, then turn it back ON, and try operating the air conditioner with the remote controller.
What to do if my Daikin B-Series Inverter has an abnormal functioning during operation?
If your Daikin Inverter experiences an abnormal functioning during operation, turn the breaker OFF, then turn it ON again. Try operating the air conditioner with the remote controller.
Why is my Daikin B-Series Inverter cooling/heating effect poor?
The cooling or heating effect may be poor due to several reasons. Ensure the air filters are clean and that nothing is blocking the air inlet or outlet of the indoor and outdoor units. Also, verify that the temperature setting is appropriate, all windows and doors are closed, and the airflow rate and direction are set correctly.
Lists functions available for cooling-only models, detailing features by category.
Lists functions available for heat pump models, detailing features by category.
Provides detailed technical specifications for wall-mounted and duct-connected cooling-only indoor units.
Provides detailed technical specifications for various outdoor units used in heat pump systems.
Details the connector layout and functions for the control PCB of wall-mounted indoor units.
Details the connector assignments and PCB layouts for outdoor unit components.
Explains core operational functions like Frequency Principle and Airflow control.
Details control specifications including Mode Hierarchy and Frequency Control logic.
Outlines critical safety warnings and precautions for handling and operating the unit.
Lists common problems and their potential solutions, including checks and error codes.
Lists all error codes displayed on the remote controller and their corresponding fault descriptions.
Detailed troubleshooting guide for indoor and outdoor units, covering various abnormalities.
Step-by-step instructions for removing outer panels, electrical box, PCB, and fan motor.
Step-by-step instructions for removing the control PCB from the outdoor unit.
Illustrates the refrigerant piping configurations for various indoor units.
Provides wiring diagrams for different types of indoor units.