Daikin MicroTech I User Manual

Menu desCrIpTIons
Quick Menu
Items in the Quick Menu contain basic unit operating status
and control set point parameters. The items shown in the Quick
Menu are Read Only if a valid password has not been entered.
The following are brief descriptions of the Quick Menu items.
No password is required to view the Quick Menu.
Table 1: Quick Menu
Menu Display Name Default Setting Range Password Level
Unit State= —
Off
Start
Recirc
FanOnly
MinDAT
Htg
Econo
Clg
None
Unit Status= —
Enable
OffMan
OffMnCtl
OffNet
OffAlm
OffFnRty
6
MWU Status= —
Inactive
Active
6
Dehum Status= — Active/Inactive 6
Ctrl Mode= Off
Off
HeatOnly
CoolOnly
FanOnly
HeatCool
Auto/Net
6
Occ Mode= Auto/Net
Occ
Unocc
TntOvrd
Auto/Net
6
Clg Capacity= — 0–100% None
OAD/Econo Cap= — 0–100% None
Htg Capacity= — 0–100% None
Reheat Capacity= — 0–100% None
Control Temp= — -50.0–200.0°F None
Occ Clg Spt = 72.0°F 0.0–100.0°F None
Occ Htg Spt = 68.0°F 0.0–100.0°F None
Disch Air= — -50.0–250.0°F None
DAT Clg Spt= 55.0°F 40.0–100.0°F None
DAT Htg Spt= 85.0°F 40.0–140.0°F None
Min DAT Limit= 55.0°F 0.0–70.0°F None
SAF Capacity= — 0–100% None
DSP — 0.2–4.0 in None
DuctSP Spt= 1.0 in 0.2–4.0 in None
RF/EF Capacity= — 0–100% None
BSP= — -0.25–0.25 in None
BldgSP Spt= 0.050 in -0.25–0.25 in None
OA Temp= — -50.0–200.0°F None
EW Temp= — -50.0–150.0°F None
Rel Humidity= — 0–100% None
Menu desCrIpTIons
www.DaikinApplied.com 21 OM 920-6 • MICROTECH UNIT CONTROLLER

Daikin MicroTech I Specifications

General

Brand	Daikin
Model	MicroTech I
Category	Controller
Language	English