EasyManua.ls Logo

Daikin R35DV1 - 3. Control Specification of R60 D Model

Daikin R35DV1
100 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
37
TM-FLH--0515-C
4 Fan speed selection
• Press the button continuously will toggle the fan speed in the following order:
Low � Med � High � Auto
• Stop pressing when the desired fan speed appears on the display screen.
5 Operation mode
• Press the MODE button to select the type of operating mode.
• For cooling only unit, the available modes are: COOL ( ), DRY ( ) and FAN ( ).
6 Automatic air swing
• Press the SWING ( ) button to activate the automatic air swing function.
• To distribute the air to a specific direction, press the SWING ( ) button and wait until the louver
move to the desired direction and press the button once again.
7 Turbo function
• Press for fast cooling operation.
• Fan speed turn to maximum speed.
• Press again to deactivate the function.
• Available under COOL and DRY modes only.
• Any change of fan speed will deactivate this function.
8 Quiet function
• Press for quiet operation.
• Fan speed turn to minimum speed.
• Press again to deactivate the function.
• Any change of fan speed will deactivate this function.
9 ON timer setting
• Press the ON TIMER button will activate the on timer function.
• Set the desired on time by pressing the ON TIMER button continuously. If the timer is set to
7.30am, the air conditioner will turn on at 7.30am sharp.
• Press the CANCEL button to cancel the on timer setting.
10 OFF timer setting
• Press the OFF TIMER button will activate the off timer function.
• Set the desired off time by pressing the OFF TIMER button continuously.
• Press the CANCEL button to cancel the off timer setting.
11 Clock time setting
• Press and hold button to set the clock time.
12 Sleep mode setting
• Press the button will activate the sleep mode function.
• This is an energy saving option. When the unit is operating under cooling mode, the set
temperature is increased by 0.5°C after 30 minutes, 1˚C after an hour, and 2˚C after 2 hours.
• This function is available under COOL mode.
13 Temperature setting
• To set the desired room temperature, press the or button to increase or decrease the
set temperature.
• The temperature setting range is from 16°C to 30°C.
• Press both buttons and simultaneously to toggle from °C to °F setting.

Other manuals for Daikin R35DV1

Related product manuals