Daikin REYA16A7Y1B - User Manual

Questions and Answers

M
Michael MontgomeryAug 9, 2025
Why is my Daikin REYA16A7Y1B not cooling or heating enough?
- M
  Monica SmithAug 10, 2025
  There could be several reasons why your Daikin Heating System isn't providing sufficient cooling or heating: * Check for any obstructions blocking the air inlet or outlet of either the outdoor or indoor unit. Remove any obstacles to ensure free airflow. * Make sure the air filter is clean. * Verify that the temperature setting is correct. * Adjust the fan speed setting on the user interface. * Ensure all doors and windows are closed to prevent drafts. * Consider if there are too many people in the room or excessive heat sources. * Block direct sunlight using curtains or blinds. * Confirm the air flow angle is properly adjusted.
C
christinaandrewsAug 18, 2025
What to do if my Daikin Heating System doesn't operate at all?
- N
  nstevensAug 19, 2025
  If your Daikin Heating System isn't operating, there are a couple of things you can check: 1. First, verify that there is no power failure and wait for the power to be restored. The system should automatically restart after power is restored. 2. Next, check if a fuse has blown or a breaker has tripped. If necessary, replace the fuse or reset the breaker.
J
Justin ReidAug 30, 2025
What to do if my Daikin REYA16A7Y1B goes into fan only operation and then stops?
- K
  Kimberly KingAug 30, 2025
  If your Daikin Heating System enters fan-only mode and then stops when attempting to heat or cool, check the following: * Ensure that neither the air inlet nor the outlet of the outdoor or indoor unit is blocked by any obstacles. Clear any obstructions to allow for unrestricted airflow. * Verify that the user interface display shows on the home screen. Refer to the installation and operation manual delivered with the indoor unit for instructions.

Summary

Specific Installer Safety Instructions

Installation Site Safety

Safety guidelines for installation site, covering service space, packaging, and accessibility.

Instructions for Equipment Using R32 Refrigerant

User Safety Instructions

Operation

Troubleshooting

Solving Problems Based on Error Codes

Provides guidance on resolving system issues by interpreting and acting on error codes.

Error Codes Overview

Special Requirements for R32 Units

Installation Space Requirements

System Layout Requirements

About the Charge Limit

To Determine the Charge Limit

Unit Installation

Preparing the Installation Site

Installation Site Requirements of the Outdoor Unit

Opening the Unit

To Open the Electrical Component Box of the Outdoor Unit

Mounting the Outdoor Unit

Piping Installation

Preparing Refrigerant Piping

Refrigerant Piping Requirements

Refrigerant Piping Material

To Select the Piping Size

To Select Refrigerant Branch Kits

Connecting the Refrigerant Piping

To Route the Refrigerant Piping

To Connect the Refrigerant Piping to the Outdoor Unit

To Connect the Multi Connection Piping Kit

Checking the Refrigerant Piping

About Checking the Refrigerant Piping

Explains when and how to perform refrigerant piping checks, including leak tests and vacuum drying.

Checking Refrigerant Piping: General Guidelines

Provides general guidelines for performing refrigerant piping checks, including equipment setup.

Checking Refrigerant Piping: Setup

Details the setup required for performing refrigerant piping checks, including necessary equipment.

To Perform a Leak Test

To Perform Vacuum Drying

Charging Refrigerant

Precautions When Charging Refrigerant

Outlines essential precautions to take before and during refrigerant charging operations.

About Charging Refrigerant

Explains the process of charging refrigerant after vacuum drying is completed.

To Determine the Additional Refrigerant Amount

To Charge Refrigerant: Flow Chart

To Charge Refrigerant

Error Codes When Charging Refrigerant

Checks After Charging Refrigerant

To Check for Refrigerant Leaks After Charging

Electrical Installation

About Electrical Compliance

Safety Device Requirements

Specifies the required safety devices, such as fuses and circuit breakers, for power supply protection.

To Route and Fix the Transmission Wiring

To Connect the Transmission Wiring

To Finish the Transmission Wiring

To Connect the Power Supply

To Connect the External Outputs

Configuration

Making Field Settings

Guides the user through the process of making essential field settings for system configuration.

Field Setting Components

To Access the Field Setting Components

To Access Mode 1 or 2

To Use Mode 1

To Use Mode 2

Mode 1: Monitoring Settings

Mode 2: Field Settings

Commissioning

Precautions When Commissioning

Checklist Before Commissioning

Checklist During Commissioning

About the BS Unit Test Run

About the Test Run

To Perform a Test Run

Error Codes: Overview

Refrigerant Leak Detection System

Wiring Diagram: Outdoor Unit

Daikin REYA16A7Y1B Specifications

General

Model	REYA16A7Y1B
Energy Efficiency Class (Cooling)	A++
Refrigerant	R32
Operating Temperature Range (Heating)	-15°C to 24°C
Operating Temperature Range (Cooling)	10°C to 46°C