Outdoor Fan / Fan Motor Si001416E
4 Removal Procedure
2. Outdoor Fan / Fan Motor
Warning
Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Step
Procedure Points
1 Remove the nut and
remove the outdoor fan.
Nut size: M6
When reassembling, align
the mark of the outdoor
fan with the D-cut section of
the motor shaft.
When reassembling, put the
fan motor lead wire through
the back of the fan motor so
as not to be entangled with
the outdoor fan.
2 Disconnect the
connector [S70].
[S70]: fan motor
When reassembling, do not
fix the fan motor lead wire
inside the hook of the
electrical box.
Nut
Outdoor fan
D-cut
(R21291)
10 mm
(0.39 inch)
(R18954)
Lead wire
Outdoor fan
(R3249)
Hook
[S70]
(R21292)
To Next Page
