Main Functions SiENBE05-722_A
30 Function and Control
1.9 HOME LEAVE Operation
Outline HOME LEAVE operation is a function that allows you to record your favorite set temperature
and airflow rate. You can start your favorite operation mode simply by pressing the [HOME
LEAVE] button on the remote control.
Detail 1. Start of Function
The function starts when the [HOME LEAVE] button is pressed in cooling mode, heating mode
(including POWERFUL operation), or while the operation is stopped. If this button is pressed in
POWERFUL operation, the POWERFUL operation is canceled and this function becomes
effective.
The [HOME LEAVE] button is ineffective in dry mode and fan mode.
2. Details of Function
A mark representing HOME LEAVE is indicated on the display of the remote control. The indoor
unit is operated according to the set temperature and airflow rate for HOME LEAVE which were
pre-set in the memory of the remote control.
The LED (red) of indoor unit representing HOME LEAVE lights up. (It goes out when the
operation is stopped.)
3. End of Function
The function ends when the [HOME LEAVE] button is pressed again during HOME LEAVE
operation or when the [POWERFUL] button is pressed.
Others The set temperature and airflow rate are memorized in the remote control. When the remote
control is reset due to replacement of battery, it is necessary to set the temperature and airflow
rate again for HOME LEAVE operation.
To Next Page
Loading...
Need help?
General
