Operation Manual SiENBE05-722_A
60 System Configuration
2.7 TIMER Operation
NOTE
Timer functions are useful for automatically switching the air conditioner
on or off at night or in the morning. You can also use OFF TIMER and
ON TIMER in combination.
To use OFF TIMER operation
• Check that the clock is correct.
If not, set the clock to the present time.
1. Press “OFF TIMER button”.
0:00 is displayed.
blinks.
2. Press “TIMER Setting button” until the
time setting reaches the point you like.
• Every pressing of either button increases
or decreases the time setting by 10
minutes. Holding down either button
changes the setting rapidly.
3. Press “OFF TIMER button” again.
• The TIMER lamp lights up.
To cancel the OFF TIMER operation
4. Press “CANCEL button”.
• The TIMER lamp goes off.
• When TIMER is set, the present time is not displayed.
• Once you set ON, OFF TIMER, the time setting is kept in the memory. (The memory is canceled when remote
control batteries are replaced.)
• When operating the unit via the ON/OFF Timer, the actual length of operation may vary from the time entered
by the user.(Maximum approx. 10 minutes)
NIGHT SET MODE
When the OFF TIMER is set, the air conditioner automatically adjusts the temperature setting (0.5°C up in
COOL, 2.0°C down in HEAT) to prevent excessive cooling (heating) for your pleasant sleep.
4
2
1, 3
To Next Page
Loading...
Need help?
General
