To Next PageTo Next PageWhy is my Daikin RXYQ16PY1 Heat Pump system not operating at all?
If your Daikin Heat Pump system isn't operating, consider these potential causes: a power failure (wait until power is restored), a blown fuse (turn off the power supply), or a blown breaker (turn the power on with the ON breaker switch in the off position).
Why is my Daikin RXYQ16PY1 system operating but cooling or heating is insufficient?
There could be several reasons why your Daikin Heat Pump isn't cooling or heating sufficiently: * Check if the air inlet or outlet of the outdoor or indoor unit is blocked by obstacles. If so, remove any obstacles to ensure proper ventilation. * Check if the remote control display shows the time to clean the air filter. Clean the air filter if necessary. * Check if there are open doors or windows and shut them to prevent wind from coming in. * Use curtains or blinds if direct sunlight enters the room during cooling operation. * Also check the temperature setting, the fan speed setting, and the air flow angle.
What to do if the display 'TEST', the unit number and the operation lamp flash and the malfunction code appears on Daikin RXYQ16PY1 Heat Pump?
If the display shows 'TEST', the unit number and the operation lamp flash, and a malfunction code appears, notify your Daikin dealer and report the malfunction code.
What to do if my Daikin Heat Pump system stops soon after starting?
If your Daikin Heat Pump system stops shortly after starting, check if the air inlet or outlet of either the outdoor or indoor unit is blocked by any obstacles. Remove any obstructions to ensure proper ventilation. Also, check if the remote control display indicates it's time to clean the air filter and clean the air filter if needed.
Overview of the product's models, appearance, combinations, and selection.
Key considerations for system design, unit performance, and installation importance.
Step-by-step installation guide and work involved in individual operations.
Procedures and outlines for testing the system after installation.
Important safety warnings and precautions regarding refrigerant leaks.
Steps and important points for handing over the system to the customer.
Contains supplementary data like noise levels, piping, examples, and diagrams.
Detailed installation procedures for 50Hz heat pump and cooling-only models.
Detailed installation procedures for 60Hz heat pump models.
Operation instructions for 50Hz heat pump and cooling-only models.
Operation instructions for 60Hz heat pump models.
Guidelines and precautions for handling and using R-410A refrigerant.
Overview of the product's models, appearance, combinations, and selection.
Key considerations for system design, unit performance, and installation importance.
Step-by-step installation guide and work involved in individual operations.
Procedures and outlines for testing the system after installation.
Important safety warnings and precautions regarding refrigerant leaks.
Steps and important points for handing over the system to the customer.
Contains supplementary data like noise levels, piping, examples, and diagrams.
Detailed installation procedures for 50Hz heat pump and cooling-only models.
Detailed installation procedures for 60Hz heat pump models.
Operation instructions for 50Hz heat pump and cooling-only models.
Operation instructions for 60Hz heat pump models.
Guidelines and precautions for handling and using R-410A refrigerant.
General| Model | RXYQ16PY1 |
|---|---|
| Category | Heat Pump |
| Cooling Capacity | 16 kW |
| Heating Capacity | 18 kW |
| Refrigerant | R410A |
| Operating Temperature Range (Cooling) | -5 to 46 °C |
| Sound Pressure Level (Outdoor Unit) | 62 dB(A) |
| Coefficient of Performance (COP) | 4.0 |
| Power Supply | 380-415V, 50Hz |
