RA Indoor Unit SiBE121021_C
172 Operation Manual
2.2.5 COMFORT AIRFLOW and INTELLIGENT EYE Operation
FTXS20/25/35/42/50G2V1B, FTXS20/25/35/42/50J2V1B
To start operation
To cancel operation
Display Operation mode Explanation
COMFORT AIRFLOW
INTELLIGENT EYE
Blank No function –
1, 2
Blank
COMFORT AIRFLOW and
INTELLIGENT EYE Operation
COMFORT AIRFLOW and
INTELLIGENT EYE
The flaps will adjust the airflow direction upward
while cooling, and adjust the airflow direction
downward while heating.
The sensors will detect the movement of people
in the sensing areas and the louvers will adjust
the airflow direction to an area where people are
not present. When there are no people in the
sensing areas, the air conditioner will go into
energy-saving mode.
The air conditioner will be in COMFORT
AIRFLOW operation combined with
INTELLIGENT EYE operation.
The INTELLIGENT EYE incorporates infrared
sensors to detect the presence of people in the
conditioned room.
When these sensors detect people, the louvers
will adjust the airflow direction to an area where
people are not present. When there are no people
in the sensing areas, the air conditioner will go
into energy-saving mode.
1. Press “COMFORT/SENSOR
button” and select an
operation mode.
• Choose the desired operation mode
out of the following sequence.
• Each time the “COMFORT/SENSOR
button” is pressed a different setting
option is displayed on the LCD.
2. Press “COMFORT/SENSOR
button”.
• Press the button to select “Blank”.
To Next Page
Loading...
Need help?
General
