SA Indoor Unit - FFQ, FCQ, FDBQ, FBQ, FHQ Series SiBE121021_C
250 Operation Manual
32 English
Quick Cooling/Heating
Quick Cooling/Heating
Ventilation
îš„Display method for ventilation settings screen
Operation Method
1
• Display the main menu screen.
(See page 26.)
îš„Changing the ventilation rate
Operation Method
1
Menu Manipulation
The indoor unit is automatically controlled, increasing the power of the
outdoor unit and quickly bringing the room to a comfortable temperature.
Press Menu/Enter button to display the
ventilation settings screen.
• Press buttons to select
on the main menu screen.
(For models with no ventilation function,
will not be displayed on the
main menu screen.)
• Bring up the ventilation settings screen
(see above).
Press Menu/Enter button to display the
ventilation rate settings screen.
• Press buttons to select
on the ventilation
settings screen.
• Fan speed display goes off and fan speed can no longer be switched.
• Cannot be set when in fan and dry modes.
• Quick Cooling/Heating mode will run for a maximum of 30 minutes before the unit automatically
returns to normal operation.
• Activating mode selector will return the air conditioner to normal operation.
• In heating mode, fan speed may increase and the wind temperature may decrease.
Adjust the operation as desired.
To Next Page
Loading...
Need help?
General
