• HRV • Heat Reclaim Ventilation
87
•HRV•VAM-FA8VE
1
7
7 Product Specification
7-2 Optional accessories
7-2-16 BRP4A50: Heater control kit
Heater control kit
Installation
Switch box
Accessories
See the right for componens.
Fixing Screw 2 pcs.
Clamp 2 pcs.
Install the Heater control kit to the outside of switch box for HRV unit as shown below.
<< Cautions >>
< Switch setting of the HRV unit >
The initial setting is required by remote controller for indoor unit or HRV unit.
See the INSTALLATION MANUAL of HRV (Local setting) Electric heater setting ON, OFF delay [19 (29 • 8 • 03]
The initial setting is necessary for safety.
3P055038
Lid
Switch Box
Fixing Screw
Heater Control kit
Fixing Screw
ADAPTER PCB:
KRP50-2
VSF 1.25mm WHITE
VSF 1.25mm BLACK
VSF 1.25mm BLUE
TERMINAL
WIRING
INSIDE DETAIL
To Next Page
Loading...
