What to do if high pressure switch was activated on Daikin Air Conditioner?
If the high pressure switch has been activated on your Daikin Air Conditioner, check the stop valve situation. Also, inspect for any abnormalities in the field piping or airflow over the air-cooled coil.
How to correct reversed power supply phase malfunction in Daikin Air Conditioner?
If your Daikin Air Conditioner shows a reversed power supply phase malfunction, correct the phase order.
What does warning indication mean on Daikin Air Conditioner about leak detection?
If your Daikin Air Conditioner is showing a warning indication that leak detection or refrigerant amount check was not performed, execute the autocharge function. Note that the unit may not be ready for leak detection functionality.
What to do if Daikin Air Conditioner has INV1 voltage power shortage?
If your Daikin Air Conditioner is experiencing an INV1 voltage power shortage, check if the power supply is within the specified range.
What causes a system mismatch in Daikin Air Conditioner with wrong indoor units?
If there is a system mismatch on your Daikin Air Conditioner, which means the wrong type of indoor units are combined, check if other indoor units have a malfunction and confirm that the indoor unit mix is allowed.
How to fix malfunction code about system test run on Daikin Air Conditioner?
If your Daikin Air Conditioner displays a malfunction code indicating that the system test run has not been executed, you should execute the system test run.
General| Model | RXYTQ8U7YF |
|---|---|
| Type | Heat Pump |
| Cooling Capacity (kW) | 22.4 |
| Heating Capacity (kW) | 25.0 |
| Refrigerant | R410A |
| Power Supply | 380-415V, 3Ph, 50Hz |
| Operating Temperature (Cooling) | -5 to 46 °C |
To Next Page
