English 10
Basic Operation
Cool/Heat/Auto/Fan Operation
Operation
1
2
● Display the main menu screen.
(See page 16.)
● Before setting the schedule , the
clock must be set.
● The date & time screen will appear.
● Set the current year, month, day, and
time. (See clock settings on page 27.)
●
If the clock has not been set, a screen
like the one on the left will appear.
Press buttons to select Yes and
press Menu/OK button.
● Press buttons to select
Schedule
the main menu screen.
Press Menu/OK button to display
the timer screen.
Setting
Clock has not been set.
Would you like to set it now?
Schedule
Yes No
Setting
Date & Time
Year 2008
Month 01
Day 01
Tuesday
12
:
00A
Operation screen
display
Describes screens that
will be displayed on the
remote controller in
operation.
Operation procedure
Explains the sequence of
operation for the remote controller.
Operate the buttons according to
the procedure.
display
Displays the location of
buttons to be operated.
How to follow the operation manual
Setting
Main Menu
Air Flow Direction
Ventilation
Schedule
Off Timer
Celsius / Fahrenheit
Maintenance Information
1/2
Preparation
● For mechanical protection purposes, apply power to the outside units at least six hours before starting the operation of the system.
1
Cool
Return Setting
Set to
Cool
74F
●Press the Operation mode selector button several times until the desired
mode Cool, Heat, Fan, or Auto mode is selected.
* Unavailable operation modes are not displayed.
Note
● Before changing the mode, conrm that the display does not indicate master controlled status.
Both heat and cool mode may not be selected if the unit is master controlled. See page 13 if
MASTER CONTROLLED icon blinks.
2
On/Off
●Press On/O button.
The Operation lamp (green) will illuminate and the system will start
operating.
3
Cool
Return Setting
Set to
Cool
74F
●The setpoint will increase by
1°F (or 1°C) when button is pressed and decrease by 1°F (or 1°C)
when button is pressed.
* Setpoint is not available in fan or dry mode.
To Next Page
Loading...
