Operational Details and Functions
There are two types of air ow direction settings.
Air ow direction swing
The louvers automatically oscillate up and down.
Air ow direction
You can select from one of ve xed directions. (This has no
relation to the angle of the louvers.)
Indoor unit
(Automatic) (Automatic)
Indoor unit
(Desired position) (Desired position)
Movement of air ow direction louver
Under the operating conditions shown below, air ow direction is controlled automatically. Actual operation may be dierent than what is
displayed on the remote controller.
Operating
condition
● Room temperature is higher than the remote controller’s setpoint (in heating operation).
● Under continuous operation with the air ow discharging horizontally.
Ventilation
Ventilation screen display properties
1
Setting
Main Menu
Air Flow Direction
Ventilation
Schedule
Off Timer
Celsius / Fahrenheit
Maintenance Information
1/2
Setting
Ventilation
Ventilation Rate
Ventilation Mode
●Display the main menu screen. (See page 16.)
●Press buttons to select Ventilation on the main menu screen.
(For models with no ventilation function,
Ventilation will not be displayed on the main menu screen.)
Press Menu/OK button to display the ventilation screen.
Changing the ventilation rate
1
Setting
Ventilation
Ventilation Rate
Ventilation Mode
●Navigate to the ventilation screen (see above).
●Press buttons to select Ventilation Rate on the ventilation screen.
Press Menu/OK button to display the ventilation rate screen.
2
Setting
Ventilation Rate
Ventilation
High
●Press the buttons to toggle between the Low and High settings.
* Only modes that can be set are displayed.