IOM 1322 • WATER-COOLED SCROLL COMPRESSOR 8 www.DaikinApplied.com
Placing the Unit
The small amount of vibration normally encountered makes
this unit particularly desirable for basement or ground oor
installations where the unit can be mounted directly to the
oor. The oor construction should be such that the unit will
not aect the building structure, or transmit noise and vibration
into the structure. Isolator pads or spring isolators are available
options.
Mounting
All compressor bolts, rubber grommets, and fasteners should
be left in place on the base plate as shown in Figure 2:
Compresssor Base Plate Mounting. None of these fasteners
are considered to be ‘temporary shipping bolts.
Figure 2: Compresssor Base Plate Mounting
To Next Page
Loading...
