33 ESC v Transmit printer’s status
34 ESC s Save configuration to the non-volatile memory
35 GS D n Set intensity level (2nd variant)
36 GS ( A Print a self-test
37 GS L Set left print margin
38 GS V Cut paper
39 GS W Set width of printable area
40 GS k Print barcode
41 GS w Set barcode horizontal size (scale factor)
42 GS h Set barcode height
43 GS H Set HRI code printing position
44 GS f Select HRI code font
45 GS v 0 Print raster bit image
46 GS * Download bit image
47 GS / Print downloaded bit image
48 GS T Turn Bluetooth module on/off
49 GS B Set communication speed
1. HT
Horizontal Tab command
[Code] [09h]
[Outline] Shifts the printing position to the next horizontal tab position.
• Ignored when the next horizontal tab position has not been set.
• The horizontal tab position is set by ESC D.
• Initial setting of the horizontal tab position is each 8 characters in
9th, 17th, 25th columns.
[See Also] ESC D
2. LF
Print and feed the paper
[Code] [0Ah]
[Outline] Prints data contained in the input buffer.
[See Also] ESC 2, ESC 3
3. CR
Print command
[Code] [0Dh]
This command is ignored.
To Next Page
Loading...
