Daktronics DMP-5000 Series - Restart Configuration

Cong
20
Figure 33: Services - Daktronics-Hosted Venus
NTCIP (DMP-5000 series player only) is chosen from the drop-down list only if the player is
being congured for a VFC controller.
Note: Use this feature only as instructed by Daktronics technicians.
Diagnostics
The IDM option (DMP-8000 series player only)
toggles the Daktronics Intelligent Device
Management (IDM) system as Active or Inactive.
Refer to Figure 35.
IDM is an internet-based monitoring and diagnostic
service. This service is installed separately. For more information on IDM, refer to Intelligent
Device Management (p.34).
Restart
Restart enables the user to create a scheduled system restart. Refer to Figure 36.
Figure 36: Conguration - Restart
Scheduled Restart
Click Active under Scheduled Restart to schedule a system restart. The Restart Settings
will appear. The system can be scheduled to restart on a weekly or daily basis. Refer to
Figure 36.
Figure 34: Services - Locally Hosted Venus
Figure 35: Services - Diagnostics