Daktronics DMP-5000 Series - DisplayFind Troubleshooting

DisplayFind Utility Quick Guide
DD1961783
Rev 03
11 October 2017
201 Daktronics Drive
Brookings, SD 57006-5128
www.daktronics.com/support
800.325.8766
Page 3 of 3
2. Click Find Displays to detect any devices using the selected network adapter. Detected devices
are listed in the bottom window of the utility. Refer to Figure 7.
Figure 7: Detected Displays
3. Double-click the desired device to launch the conguration utility within a web browser.
Troubleshooting
If the hardware and software are congured with a DMP player behind a VIP processor running in NAT
mode, the DisplayFind utility cannot detect the player. In this case, use the DisplayFind utility to nd the
VIP processor and then remove the :85 port number from the address to access the player’s UI.