1 sec
To engage Bluetooth pairing mode, press and hold the Power
buon for 1 second. The headphone Bluetooth indicator will
pulse blue to indicate pairing mode.
Now, open the Bluetooth setup menu on the device you wish to
pair with your IO-12 headphones and select “DALI IO-12” in the
list of available connections.
The Bluetooth indicator on the headphones will illuminate
continuously blue when connected to a Bluetooth device. When
you subsequently play music or make and receive calls from the
Bluetooth device, its audio stream will be routed through the
headphones.
Your IO-12 headphones will remember a total of four previously
connected Bluetooth devices and will automatically aempt to
connect to the most recently used device when switched on. If the
most recently used device is not available, the headphones will work
down the list of previously used devices.
The IO-12 additionally supports Bluetooth Dual Mode that enables
simultaneous connection of two sources to the same headphones,
– a smartphone and a computer for example.
NOTE
If no device is paired
within 3 minutes, your
IO-12 headphones will
automatically disengage
Bluetooth pairing mode.
You may need specifical-
ly to select your IO-12
headphones as the
playback device in some
audio apps.
If required, you can re-
name your IO-12 head-
phones via the Bluetooth
setup menu of a paired
audio device.
If your IO-12 headphones
are playing audio via a
USB connection when a
Bluetooth connection is
made, the Bluetooth con-
nection will take priori.
4.3 Bluetooth Connection
To connect your IO-12 headphones to a Bluetooth
audio source such as a smart phone, the headphones
must be switched to Bluetooth pairing mode.
4. USING YOUR DALI IO-12 HEADPHONES
10
To Next Page
Loading...
Need help?
General