6. DALI IO-12 TECHNICAL SPECIFICATIONS
IO-12
Frequency range 10 - 48,000 Hz ±3 dB
Analogue input sensitivi
Passive mode
Active mode
91 dB SPL, 1 mW @ 1 kHz
300 mV rms, 94 dB SPL @ 1 kHz
Impedance (Passive mode) 25 Ohm
Maximum SPL 100 dBA
Headphone principle Closed back circumaural (over ear)
Full range driver 50 mm with SMC based magnet system
Driver diaphragm Free edge paper fibre cone
Amplifier principle Fully bridged (BTL) Class D output stage
Connection input(s) Bluetooth 5.2 (wireless)
3.5 mm mini jack stereo
USB-C
Wireless input audio codecs AAC
aptX
aptX HD
aptX Adaptive
Supported input audio formats 16 - 24 bit audio
32 / 44.1 / 48 / 96 kHz sample rate
Functions Power ON/OFF
Bluetooth pair/release
Volume up/down
Play/pause/skip track
Take call
ANC modes (ON/Transparency/OFF)
Sound modes (Hi-Fi/Bass)
IO-12
Other features Wind Noise Suppression
Hi-Res Audio Certified
Noise reduction Active Noise Cancellation (ANC)
Hands-free calls and voice assist Updated Clear Voice Communication (CVC)
Baery - playback time Up to 35 hours
Baery - charge time 1 hour and 50 minutes
Replaceable earpads Yes
Compact storage One-way foldable
IP rating IP52
Weight 0.37 kg / 0.82 lb
Shipping weight 2.25 kg / 4.96 lb
Finish Dark Chocolate
Accessories included 1.2 m USB-C cable (charging + USB audio)
1.2 m stereo mini jack cable
3.0 m stereo mini jack cable
3.5 mm stereo mini jack to 6.3 mm jack adaptor
Flight adaptor
Luxury travel case
All technical specifications are subject to change without notice.
To Previous Page
Loading...