Name: Dali io-12
Brand: Dali
Rating: 4 (1 reviews)

To Next Page

To Previous Page

4.1 Geing started

Your IO-12 headphones are shipped with adequate baery

charge for initial use so they can be switched on and enjoyed

immediately.

To switch on your IO-12 headphones press the power

buon so that the green indicator illuminates. When

switched on and disconnected from a baery charger,

the remaining baery charge level will be displayed by the

baery indicator. The baery indicator will change colour

from green (>50% charge) via orange to red to indicate

decreasing charge. The indicator will ﬂash red when

baery charge is critically low.

Even though your IO-12 headphones will have baery

charge when ﬁrst switched on, it is recommended that you

connect them to a charger using the USB cable supplied. A

standard USB mobile phone charger or a computer USB

socket that incorporates an appropriate power supply can

be used. When connected to a charger, the headphone

baery indicator will ﬂash amber while charging and

illuminate in solid green when fully charged.

NOTE

Baery charge level is

reported audibly by a

headphone voice prompt

at switch on and when

critically low.

If your IO-12 headphones

are le switched on with

no audio source playing,

with no mini jack connec-

tion, and with noise-can-

celling disengaged, they

will switch o automati-

cally aer 20 minutes.

4. USING YOUR DALI IO-12 HEADPHONES

Questions and Answers:

Need help?

Do you have a question about the Dali io-12 and is the answer not in the manual?

Dali io-12 Specifications

General