Dali io-12 User Manual

NOTE
When replacing ear pads
ensure that they are ro-
tated fully clockwise and
click twice into position.
Incorrectly fied ear
pads will impact on head-
phone bass reproduc-
tion and noise-cancelling
performance.
5. MAINTAINING YOUR DALI
IO-12 HEADPHONES
5.1 Ear Pads
IO-12 headphone ear pads can be removed for cleaning or
replacement. The ear pads aach via a bayonet fiing.
To remove an ear pad, simply turn it anti-clockwise and li
it away from the headphone cup.
Replacement ear pads can be ordered through your local
DALI retailer or distributor, or directly from DALI at
www.dali-speakers.com
5.2 Cleaning
If your IO-12 headphones need cleaning, wipe their surfaces
with a so, lint-free cloth. A slightly damp cloth may be used
for stubborn marks, but it is important that your IO-12
headphones do not get wet. The use of abrasive or solvent
based cleaning fluids is not recommended.
Twist the ear pad
anti-clockwise to
remove it.
Use markings on inside of ear pad and
housing to align ear pad correctly.
16

Dali io-12 Specifications

General

Driver Type	Electro-Dynamic
Driver Size	50 mm
Bluetooth Version	5.0
Bluetooth Profiles	A2DP, AVRCP, HFP
Active Noise Cancellation	Yes
Microphone	Yes
Water Resistance	No
Bluetooth Codecs	SBC, AAC, aptX
Wireless Range	10 m
Battery Life	Up to 35 hours
Charging Time	Approx. 2.5 hours