Dali SOUND HUB COMPACT User Manual

With your SOUND HUB COMPACT and speakers connected
you are almost ready to enjoy your new audio system. However,
there are some further configuration options that you may
need to adjust using the switches on the SOUND HUB
COMPACT rear panel. The switches are illustrated in Diagram 1
and described here.
3.3 Finishing your SOUND HUB COMPACT installation
• BAND: The BAND switch changes the radio frequencies over which
the SOUND HUB COMPACT broadcasts to its connected speakers.
The default seing for the BAND switch is AUTO, and this should
be selected for speaker models that display the AUTO logo
. However, some DALI speaker models require the 5.8GHz band.
If your DALI speakers do not display the AUTO logo, set the BAND
switch on the SOUND HUB COMPACT to “5.8GHz”.
• AUTO SOURCE SELECT: With ON selected, when a connected
audio source becomes active your SOUND HUB COMPACT will
automatically switch from standby mode to operational mode and play
the source.
15

Dali SOUND HUB COMPACT Specifications

General

Brand	Dali
Model	SOUND HUB COMPACT
Category	Switch
Language	English