Dali SUITE - Tuning of Suite S 1.2

10
English
Tuning of Suite S 1.2
Tuning of Suite S 1.2
Once you have chosen the set-up and connection you are going to use, and
have positioned the subwoofer in the desired spot, you can begin the task
of tuning the system. Please note that the actual location of the subwoofer
greatly affects its contribution to the total acoustic image. For example, if
you put Suite S 1.2 in a corner, the bass will be considerably stronger than
if it had been placed midway between two corners.
You can use the procedure below to achieve excellent results. Use a piece
of music you know well, preferably containing rhythmic bass tones such as
bass drum, electric bass or similar.
Begin by setting "Volume" and "Crossover" to the middle position ("12
o’clock"). Place the "Phase" switch in the 180° position, and set both
"Auto" and "Power" to the "ON" position.
1.
Mains lead
2.
Power, on/off switch
3.
On/off indicator
4.
Auto Stand-by
5.
Fuse
6.
Volume, volume control
7.
Phase, 0˚ og 180˚ phase switch
8.
Crossover frequency
9.
Heat sink, DO NOT COVER!
10.
LFE input
11.
Stereo Line level, Line signal
1
2
3
4
4
5
6
7
8
9
9
Even small changes in the listening room can affect the sound.