Dali SUITE - Connecting Suite S 1.2; Connection to surround amplifier with separate subwoofer output terminal

8
English
Connecting Suite S 1.2
Connecting Suite S 1.2
When you complement your stereo or surround sound system with the
Suite series subwoofer, Suite S 1.2, with active crossover network and
ampli er, you have two different connection options: connection to a sur-
round ampli er subwoofer output terminal, or to a stereo ampli er line
output terminal.
Connection to surround ampli er with
separate subwoofer output terminal (Fig. 5)
If you want to use Suite S 1.2 for reproduction of the special subwoofer
signal from a surround ampli er with separate subwoofer output termi-
nal, connect this to the LFE input terminal on Suite S 1.2.
If the LFE input terminal is selected, the crossover network in Suite S 1.2 is
not active. The LFE input terminal should therefore only be used together
with a special subwoofer output terminal in which the signal has already
been  ltered, so the subwoofer only receives the lowest frequencies.
Fig. 5
Visit your authorised DALI dealer for more info about connecting S 1.2