84 |
6. Check the flow by means of the g/s infor-
mation indicated next to the letter F on the
brew group display.
7
. At the end of the regulation procedure,
screw the cap back onto the discharge
cover panel.
13. Periodic maintenance by the user
WARNING
The manufacturer shall not be liable for any injury or damage caused to
people, things, or animals as a result of the lack of proper maintenance of
the equipment. The efficiency of the equipment is guaranteed only by its
proper maintenance. Thus it is important to follow the instructions below to
properly carry out maintenance interventions.
Before carrying out any maintenance intervention, be sure to wear high
temperature protective gloves.
To Next Page
Loading...
