Need help?Do you have a question about the Dalla Corte ZERO BARISTA and is the answer not in the manual?
General information concerning the structure of this manual.
Explains symbols used in the manual for danger, attention, and notes.
Provides important information on the safety, use, and maintenance of the equipment.
Defines the machine's intended professional use and prohibits improper usage.
Lists critical instructions for safe installation, operation, and electrical connections.
Evaluates the need for fire prevention installation and notes no flammable liquids circulate.
Machine is equipped with anti-vibration pads; excessive vibrations indicate mechanical failure.
Specifies the measured noise level according to UNI EN ISO 9614-2.
Confirms machine conformity with Electromagnetic Compatibility Directive (EMC).
Assesses residual risks and implements precautions for fire prevention during design.
Identifies potential risks such as scalding and burns due to high temperatures.
Lists and describes the various parts of the espresso machine.
Details the parts supplied with the machine.
Provides dimensions, power supply, weight, and power ratings.
General overview of transport and installation procedures.
Instructions on how the machine is transported and handled in its packaging.
Steps for safely unpacking the machine and handling packaging materials.
Guidelines for proper placement, distance from walls, and support surface requirements.
Procedures for connecting the machine to the water mains, including requirements.
Instructions for electrical connection, emphasizing safety and grounding.
Identifies and explains the controls located on the front of the machine.
Details the hot water and cup warming buttons.
Explains the display and buttons for controlling coffee dispensing.
Describes indicators, clock, and alarm signals on the main display.
Details indicators, clock, and alarm signals on displays for units 2 and 3.
Explains navigation through the main menu for unit 1.
Explains navigation through the main menu for units 2 and 3.
Guides on setting unit parameters like temperature, doses, and flow.
Instructions for adjusting and saving the unit's temperature settings.
Details how to view, program, and copy coffee doses.
Instructions for setting and storing the coffee flow rate.
Accessing machine settings for info, boiler temp, machine parameters, etc.
Accessing information on lights, alarms, counters, and firmware.
Setting the boiler temperature for hot water and steam.
Setting the water dosing time for tea.
Password-protected page for machine settings.
Password-protected page for coffee grinder settings.
Password-protected page for language and unit selection.
Choosing the control key for setting functions.
Setting the date and hour for the machine.
Password-protected page for the liter counter.
Password-protected page for machine maintenance.
Password-protected page for machine settings reset.
Password-protected page for machine testing.
Step-by-step guide for brewing an espresso.
Instructions for steaming milk correctly and safely.
Procedure for dispensing hot water and tea.
Operation of the cup warmer function and its power settings.
Overview of the machine's electronic control and alarm system.
Details alarms related to dispensing groups, their causes, and solutions.
Lists machine-specific alarms, their causes, and solutions.
Daily cleaning procedures for wands, grids, and basins.
Steps for cleaning portafilters, filters, shower heads, and holders.
Instructions for running automatic cleaning cycles for dispensing groups.
Daily procedure for washing the boiler to ensure clean hot water.
General| Type | Espresso Machine |
|---|---|
| Boiler Type | Independent Coffee Boilers |
| Material | Stainless Steel |
| Group Type | Saturated Group |
| Pump Type | Rotary Pump |
| Pre-infusion | Adjustable Pre-infusion |
| Boiler Material | Stainless Steel |
| Boiler System | Multi-Boiler System |
To Next Page
