Dalla Corte 20.03 EVOLUTION

To Next Page

INSTALLER’S INSTRUCTIONS

RELEASE 7.03

Index

• DATA TAG

• ACCESSORIES LIST

• INSTALLER’S GUIDELINES

• INSTALLATION

• INITIAL SET UP

• HEATING

• GROUP DOSES PROGRAMMING

• MACHINE OPERATION

• MACHINE ADJUSTMENTS

• TEST

• ALARM ADMINISTRATION

l. 13,5 0.15 MPa

INSTALLER’S MANUAL

DATA TAG

DALLA CORT

S.r.l

Via Broglio, 24

20158 Milano Italy

Serial n° ANNO 2007

MOD. 20.03 EVOLUTION

400 V 3N ~ Hz 50 – 60

230 V 3 ~

230 ~

WATT. IPX2

Maximum water pressure 0.6 Mpa

ATTENTION

End user must set up electrical, water and drain systems in advance, to ensure a correct installation.

Installer can not modify systems set up in advance by the end user (see chapter “End User Set Up

Procedures” in the Use and Maintenance Manual enclosed with each unit.)

ATTENTION

The manufacturer reserves himself the right to modify the present manual without the obligation to up to

date the previous editions.

Main Page

Need help?

Do you have a question about the Dalla Corte 20.03 EVOLUTION and is the answer not in the manual?

Summary

DATA TAG

ACCESSORIES LIST

INSTALLERS GUIDELINES

INSTALLATION

ELECTRICAL SYSTEM

Details on connecting the machine to the electrical circuit, including safety precautions.

WATER SYSTEM CONNECTIONS

Instructions for connecting the machine to the water supply, including pressure requirements.

DRAIN SYSTEM

Guidance on connecting the drain hose to ensure proper water drainage from the machine.

INITIAL SETUP

HEATING

GROUP DOSES PROGRAMMING

MACHINE OPERATION

MACHINE ADJUSTMENTS

LANGUAGE SELECTION

Procedure for selecting the user interface language for the machine.

SET MENU

Navigating the settings menu to access parameters like temperature and doses.

TEMPERATURES

Adjusting boiler and group head temperatures for optimal performance.

SETTINGS

Configuring machine parameters for group head matching, autofill, and coffee dispensing.

DOSES

Programming and setting coffee and hot water doses for various buttons.

VISUAL MENU

COUNTERS

Viewing and resetting counters for coffee doses, supplies, and teas.

GRINDING

Monitoring grinder performance and coffee dispensing quantities.

TEMPERATURE

Checking boiler and group head temperatures for operational status.

TEST MENU

BUTTON AND VOLUMETRIC COUNTER TESTS

Testing control panel buttons and volumetric counters for proper function.

PROBE, RELAY, AND SYSTEM TESTS

Verifying probes, relays, triacs, memory, and system connections for faults.

ALARMS MENU

ALARMS ADMINISTRATION

MEMORY AND TRANSFORMER ALARMS

Handling alarms related to memory loss and transformer issues.

PROBE AND SYSTEM ALARMS

Addressing alarms for auto-fill, safety, and temperature probe faults.

GROUP AND FLOWMETER ALARMS

Managing alarms for group probes, flowmeters, and dispensing timeouts.

WIRING DIAGRAM