Dalla Corte 20.03 EVOLUTION - MACHINE ADJUSTMENTS; LANGUAGE SELECTION; SET MENU; TEMPERATURES

6
INSTALLER’S INSTRUCTIONS
RELEASE 7.03
This espresso machine has a series of adjustable parameters to optimize its functions and coffee
extraction.
Only qualified personnel specifically trained by the manufacturer may perform parameter adjustments
Parameter programming may be accessed through the use of the remote programmer supplied to all
authorized dealers
Connect the remote control to the cable inside the machine, on the right upper side
The programmer will display (main menu)
S E T - V I S U A L - - -
A L A R M S - - T E S T
Pushing  will display
- - - - I T A L I A N O - - - -
R E L E A S E - N . - - 7 . 0 1
LANGUAGE SELECTION
The default language (ITALIANO) will blink. Using ► or ◄, choose desired language and press OK to
confirm.
It will display
S E R I A L - N ° - 0 0 0 0 0 0
A D R E S S N ° 0 1
Insert the serial number of the machine and confirm the adress n.01 ( only in some special cases it will be
modified in 02 etc.)The display will revert to the main menu, with SET blinking by default, With ► or ◄
select desired item on the menu (chosen item will blink) and push OK to confirm selection.
SET MENU
Pushing OK while SET is blinking on the main menu will give access to the boiler and group heads
temperature parameters submenu.
- - T E M P E R A T U R E S - -
S E T T I N G - - - - D O S E S
TEMPERATURES will blink by default. Push OK to enter temperature programming
B O I L E R - - - S E T - - - -
- - - - 1 2 0 , 0 ° C . - - - -
The default is 120 Degrees C.Range is between 110° Degrees C to 125° Degrees C
Push ► or ◄ to change desired boiler temperature and press OK to confirm.
After confirmation the display shows
B O I L E R - D E L T A - T - -
- - - - - 2 , 0 ° C . - - - - -
The thermal Delta is the temperature variation allowed before the heating element activates. Therefore,
the lower the value, the lower thermal modification will be allowed.
The default is 2 Degrees C. Range is between 1° Degrees C to 5° Degrees C
Push ► or ◄ to change thermal Delta of the boiler and press OK to confirm
After confirmation the display shows
G R O U P - - N . 1 - S E T - -
- - - - - 9 5 , 0 ° C . - - - -
The default is 95° Degrees C. Range is between 80° Degrees C to 110° Degrees C
Push ► or ◄ to change desired group temperature and press OK to confirm
After confirmation the display shows
MACHINE ADJUSTMENTS