Dallara Automobili – GP2 user manual 10/87
SET-UP
Suggested Setup
This setup considers the complete car, with all liquids (water, oil, etc), driver and 30 lts of
fuel, ready to race.
BRBR
4444
BRBR
4444
0
--
32 32
20°
80°
Std. Hewland
Nm
Toe 0,15" in 0,15" in
Caster
Camber -0,8 -0,8
A.R.B.
Bar
External attachments P1
Ø18x4,5
Setting
Damper
Differential
Ramps brake
Ramps power
Plates
Preload
Rear
Front
Damper
Packers -mm
Free work space
with car @ ground
15 mm
Setting
Bump stop type
Koni Std 46x10 Koni Std 46x10
Preload 1/2 Turn 1/2 Turn
Springs
Rate 900
B.S. length 10 mm
Height
Axle
Caster Std. Std.
Camber -2,3 -2,3
Toe 15" out 15" out
A.R.B.
Bar
Setting
25x2,5
External attachments P3
Bump stop type Koni rubber
B.S. length 10 mm
Koni rubber
Setting
Free work space
with car @ ground
6mm
Packers -mm
Preload --
Axle
Height
mm mm
24 24
Springs
Rate 1200