Need help?Do you have a question about the Dametric BRM-DM1 and is the answer not in the manual?
General| Brand | Dametric |
|---|---|
| Model | BRM-DM1 |
| Category | Control Unit |
| Language | English |
LED indicators meaning for ON, Alarm, Limit, Ethernet, CAN, USB.
Parameters for desired operation via unit or Panel-PC.
Detailed menu structure and parameters for BRM-DM1.
Detailed menu structure and parameters for BRM-DM2.
Description of GMS measure system, node number, bus type, serial number, revision.
Description of CAN-Ethernet conversion function, valid for BRM-DM2.
Parameters for rotor position, including calibration and work mode.
Parameters for reference vibration, including alarm limits.
Parameters for touch vibration, including sensitivity settings.
Parameters related to motor control, including speed, direction, and current.
Parameters for hydraulic pressure measurement for control apart.
Parameters for hydraulic pressure measurement for control together.
Parameters for temperature measurement on the oil from the bearing.
Parameters for temperature measurement on the oil to the bearing.
Parameters for main motor power, including alarm limits and range.
Parameters for current signal input, 4-20mA.
Parameters for FeedGuard function, including rotor travel distance and type.
Function for controlling rotor movement, static vs. dynamic modes.
Function for adjusting rotor movement, calibration methods.
Parameters for gap control rotation, specific to BRM-DM2.
Parameters for gap control station, specific to BRM-DM2, not for SD-refiner.
Parameters for GapGuard function, limits and gain for rotor/stator.
Status and configuration for digital inputs and outputs.
Configuration for AGS interface, including gap sensor type.
Function for Safeset Monitor, including alarm conditions and pulse counts.
Configuration of measure function for analog output modules.
To Next Page
