33
NOTE: We recommend that you change the thin tube and domes
NOTE: Use only original consumables e.g. tubes and domes.
11.3 i Cleaning earmoulds
1. Detach the earmould and tubing from the hearing aid before cleaning
2. Use a mild soap to clean the earmould and rinse with lukewarm water
3. Dry the earmould thoroughly. Use the airbulb and cleaning wire to
remove residual water and debris from the tubing
i
NOTE: Use the wire loop on the brush to remove wax etc.
NOTE: We recommend that you change the tube every three months
Cleaning metal hook
Remove the earmould and tubing from the metal hook
Use a mild soap to clean the tube and the earmould. Rinse with lukewarm
water.
tube and earmould.
i
NOTE: Do not use alcohol or other cleaning solvents to clean the
To Next Page
Loading...
