2 Chrome Rails (for attachment to Work top)
6 Self-Tapping Screws (to attach chrome rails)
1 CO
2
Cylinder Support Stand
1 CO
2
Cylinder (empty)
1 CO
2
Regulator (high/low pressure gauges)
1 CO
2
Air Line Hose
2 CO
2
Air Line Hose Connectors
1 CO
2
Air line hose plug (located exterior rear cabinet)
1 Beer Keg Coupler
1 Beer Tower Unit (incl. faucet, hose, nut and rubber washer)
4 Machine Screws (to attach to beer tower)
1 Gasket (beer tower base)
1 Pull Handle (beer tower faucet)
1 Beer Keg Stand (required for “squat” keg installations only)
1 Protective Plate (refrigerator cabinet floor)
1 Plastic Drip Tray (2 piece)
4 Swivel Casters - 2 locking- (optional installation)
4 Lock washers (for caster installation)
1 Wrench (for caster installation)
Description Part No.
Beer Faucet Lock. #7703
Beer Line Cleaning Kit. #CLEANINGKIT
For more details on purchasing any of the above listed
accessories, please contact our customer service
department
at 1-800-26- (1-800-263-2629).
FEATURES
INCLUDED
ACCESSORIES
Remove and inspect all
accessories supplied with
this unit are present and in
good condition. In the event
any of the accessories are
missing and /or not in good
condition, please call Danby
TOLL FREE at the number
listed below and speak with
one of our Customer
Service Representatives.
OPTIONAL
ACCESSORIES
These are NOT included with
the CHILL ‘N TAP, and must
be purchased separately.
CHILL ‘N TAP ACCESSORIES
7
To Next Page
Loading...
