SETTING UP YOUR CHILL ‘N TAP
LOCATION
• Selecting the proper location will ensure peak
performance levels of your appliance. Choose a
location where the unit will not be exposed to
direct sunlight and away from heat emitting sources.
• Do not use this product near water, for example: in
a wet basement, near a swimming pool or sink.
• This appliance is inclusive of a condenser fan
cooled cabinet, the front intake and exhaust should
have 2-3 inches clearance in order to maintain
proper cooling.
DISPOSAL OF
PACKAGING
• Our products use environmentally friendly (recycla-
ble) materials. To this end, individual packaging
materials are clearly identified with a recycling
symbol. Always use proper disposal methods.
• When any appliance finally wears out, always use
safe and proper disposal methods. (
see “DON’T
WAIT, DO THIS NOW” on pg. 5
)
WE CARE ABOUT THE
ENVIRONMENT
Before putting the appliance into use...
If the appliance has recently been transported or tipped, before connecting the appliance
to any electrical power supply , leave it standing (upright) for about 1 hour. This will reduce
the possibility of malfunctions in the cooling system due to transport handling. Clean the
appliance thoroughly, both interior and exterior. (
See ‘Cleaning and Maintenance’ on pg. 17
)
IMPORTANT:
• Ensure that all included accessories are present and in good condition (
see ‘Included
Accessories on pg. 7
).
• Make sure you have read and understood all important safety information on pages 4-5.
9
This appliance is designed for
"indoor" use only and should
not be used "outdoors".
To Next Page
Loading...
