Need help?Do you have a question about the d&b audiotechnik V8 and is the answer not in the manual?
General| Power Handling (AES) | 400 W |
|---|---|
| Nominal Impedance | 8 ohms |
| Nominal impedance (LF) | 8 ohms |
| Power handling capacity (RMS / peak) HF | 100 W / 400 W |
| Connectors | 2 x NL4 |
| Components | 1 x 1.4" HF compression driver |
| Nominal impedance (HF) | 8 ohms |
| Power handling capacity (RMS / peak) LF | 400/1600 W |
| Cabinet construction | Plywood |
| Type | 2-way passive loudspeaker |
| Nominal dispersion (h x v) | 80° x 50° |
| Coverage Angle | 80° x 50° |
Discusses potential risks of personal injury and material damage from high SPL and magnetic fields.
Overview of the V8/V12 line array loudspeaker, its acoustic and mechanical compatibility, and design.
Details the 4-pin (NL4, NLT4) and optional EP5 connectors used for V8/V12 cabinets.
Explains how to operate V8/V12 loudspeakers with d&b amplifiers, including setup modes.
Covers adjustable controller functions like CUT, CPL, and HFC for acoustic adjustment.
Presents isobar diagrams showing horizontal dispersion angles over frequency for V8 and V12.
Lists key technical data for V8/V12 systems, including frequency response and max sound pressure.
States that V8 and V12 loudspeakers conform to relevant EC directives.
Provides guidance on the proper disposal of electrical and electronic equipment.
To Next Page
